User Contributed MET/CAL PROCEDURE ============================================================================= INSTRUMENT: Panasonic VP-7750P:Wow and Flutter Meter DATE: 26-Dec-96 AUTHOR: User Contributed REVISION: ADJUSTMENT THRESHOLD: 70% NUMBER OF TESTS: 32 NUMBER OF LINES: 372 CONFIGURATION: Fluke 5700A CONFIGURATION: HP 5335A STANDARD: Stanford Research FS700 ============================================================================= STEP FSC RANGE NOMINAL TOLERANCE MOD1 MOD2 3 4 CON 1.001 ASK- R N P M F V 1.002 ASK+ X 1.003 STD Stanford Research FS700 1.004 IEEE [@5335][TERM LF] 1.005 IEEE [@5335]IN;AX1; 1.006 HEAD ÍÍ INITIAL CONDITIONS ÍÍ 1.007 DISP ÿÿÿÿÿÿÿÿSet the UUT as follows: 1.007 DISP INDICATION ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16]CCIR 1.007 DISP OSC OUT ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16]TEST 1.007 DISP METER RANGE % ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16]3 (TEST) 1.007 DISP FUNCTION ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16]LIN (TEST) 1.007 DISP COUNT/W&F switch ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16]W&F (out) 1.008 DISP With no siganl at the UUT INPUT connector, 1.008 DISP adjust the CCIR/DIN TEST ADJ control for a needle 1.008 DISP indication of C-D on the TEST scale. 1.009 HEAD {} 1.010 HEAD {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»} 1.011 HEAD {º Wow and Fluter Accuracy Tests º} 1.012 HEAD {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ} 1.013 HEAD {ÍÍ 3% Range ÍÍ} 1.014 HEAD ÍÍ Wow and Fluter Accuracy Tests ÍÍ 1.015 JMP 2.001 1.016 EVAL 2.001 DISP Set the UUT OSC OUT to 3kHz. 2.002 DISP Connect the test equipment as follows: 2.002 DISP Wavetek 166 FUNC OUT ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16]HP 5335A INPUT A 2.002 DISP FLUKE 5700A V ê A HI/LO output ÄÄÄÄ[16]166 VCG(FM) IN 2.003 DISP Set the Wavetek OUTPUT ATTEN for 0dB and the vernier 2.003 DISP about a quarter turn from full CCW. 2.004 DISP Adjust the Wavetek for a 3kHz sine wave output. 2.005 MESS Adjust the Stimulus output for a reading of 3090Hz 2.005 MESS on the frequency counter. 2.006 5700 80mV N 2W 2.007 MEME >1 2.008 MESS Adjust the Stimulus output for a reading of 2910Hz 2.008 MESS on the frequency counter. 2.009 5700 -80mV N 2W 2.010 MEM* -1 2.011 MEME >2 2.012 MATH mem = ((m[1] + m[2]) / 2.828) * 1e-3 2.013 MEME >3 2.014 MESS 2.015 5700 * S 2.016 DISP Disconnect the FUNC OUT from the 5335A INPUT A, and 2.016 DISP connect it to the UUT INPUT connectors. 2.017 5700 V 10H S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 2.018 ACC 160mV 600P% 0.016U 2.019 MEMI Enter the UUT meter indication. 2.020 MATH mem1 = 3 2.021 MEME 2.022 MEMC percent 5.00% 10H #! Test Tol 8, Sys Tol 0.112, TUR 71.429 (>= 4.00). 3.001 MEME <3 3.002 5700 V 100H S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 3.003 ACC 160mV 110P% 0.01U 3.004 MEMI Enter the UUT meter indication. 3.005 MATH mem1 = 3 3.006 MEME 3.007 MEMC percent 5.00% 100H #! Test Tol 8, Sys Tol 0.0276, TUR 289.855 (>= 4.00). 4.001 DISP Disconnect the Wavetek FUNC OUT from the UUT and connect 4.001 DISP it to INPUT A on the 5335A. 4.002 DISP Adjust the Wavetek for a 3kHz sine wave output. 4.003 MESS Adjust the Stimulus output for a reading of 3030Hz 4.003 MESS on the frequency counter. 4.004 5700 25mV N 2W 4.005 MEME >1 4.006 MESS Adjust the Stimulus output for a reading of 2970Hz 4.006 MESS on the frequency counter. 4.007 5700 -25mV N 2W 4.008 MEM* -1 4.009 MEME >2 4.010 MATH mem = ((m[1] + m[2]) / 2.828) * 1e-3 4.011 MEME >3 4.012 MESS 4.013 5700 * S 4.014 DISP Disconnect the FUNC OUT from the 5335A INPUT A, and 4.014 DISP connect it to the UUT INPUT connectors. 4.015 DISP Connect the 5700 to the VCG input on the Wavetek 4.015 DISP through the luke AC Divider. 4.016 5700 V 10H S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 4.017 ACC 50mV 600P% 0.016U 4.018 MEMI Enter the UUT meter indication. 4.019 MATH mem1 = 1 4.020 MEME 4.021 MEMC percent 5.00% 10H #! Test Tol 2.5, Sys Tol 0.046, TUR 54.348 (>= 4.00). 5.001 MEME <3 5.002 5700 V 100H S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 5.003 ACC 50mV 110P% 0.01U 5.004 MEMI Enter the UUT meter indication. 5.005 MATH mem1 = 1 5.006 MEME 5.007 MEMC percent 5.00% 100H #! Test Tol 2.5, Sys Tol 0.0155, TUR 161.290 (>= 4.00). 6.001 HEAD {} 6.002 HEAD {ÍÍ 1% Range ÍÍ} 6.003 JMP 7.001 6.004 EVAL 7.001 DISP Set the UUT METER RANGE to 1%. 7.002 5700 V 10H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 7.003 ACC 50mV 600P% 0.016U 7.004 MEMI Enter the UUT meter indication. 7.005 MATH mem1 = 1 7.006 MEME 7.007 MEMC percent 5.00% 10H #! Test Tol 2.5, Sys Tol 0.046, TUR 54.348 (>= 4.00). 8.001 5700 V 100H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 8.002 ACC 50mV 110P% 0.01U 8.003 MEMI Enter the UUT meter indication. 8.004 MATH mem1 = 1 8.005 MEME 8.006 MEMC percent 5.00% 100H #! Test Tol 2.5, Sys Tol 0.0155, TUR 161.290 (>= 4.00). 9.001 DISP Disconnect the Wavetek FUNC OUT from the UUT and connect 9.001 DISP it to INPUT A on the 5335A. 9.002 DISP Connect the 5700 output to the VCG input without 9.002 DISP the divider. 9.003 DISP Adjust the Wavetek for a 3kHz sine wave output. 9.004 MESS Adjust the Stimulus output for a reading of 3009Hz 9.004 MESS on the frequency counter. 9.005 5700 7mV N 2W 9.006 MEME >1 9.007 MESS Adjust the Stimulus output for a reading of 2991Hz 9.007 MESS on the frequency counter. 9.008 5700 -7mV N 2W 9.009 MEM* -1 9.010 MEME >2 9.011 MATH mem = ((m[1] + m[2]) / 2.828) * 1e-3 9.012 MEME >3 9.013 MESS 9.014 5700 * S 9.015 DISP Disconnect the FUNC OUT from the 5335A INPUT A, and 9.015 DISP connect it to the UUT INPUT connectors. 9.016 5700 V 10H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 9.017 ACC 14mV 600P% 0.006U 9.018 MEMI Enter the UUT meter indication. 9.019 MATH mem1 = .3 9.020 MEME 9.021 MEMC percent 5.00% 10H #! Test Tol 0.7, Sys Tol 0.0144, TUR 48.611 (>= 4.00). 10.001 MEME <3 10.002 5700 V 100H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 10.003 ACC 14mV 120P% 0.006U 10.004 MEMI Enter the UUT meter indication. 10.005 MATH mem1 = .3 10.006 MEME 10.007 MEMC percent 5.00% 100H #! Test Tol 0.7, Sys Tol 0.00768, TUR 91.146 (>= 4.00). 11.001 HEAD {} 11.002 HEAD {ÍÍ .3% Range ÍÍ} 11.003 JMP 12.001 11.004 EVAL 12.001 DISP Set the UUT METER RANGE to .3%. 12.002 5700 V 10H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 12.003 ACC 14mV 600P% 0.006U 12.004 MEMI Enter the UUT meter indication. 12.005 MATH mem1 = .3 12.006 MEME 12.007 MEMC percent 5.00% 10H #! Test Tol 0.7, Sys Tol 0.0144, TUR 48.611 (>= 4.00). 13.001 5700 V 100H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 13.002 ACC 14mV 120P% 0.006U 13.003 MEMI Enter the UUT meter indication. 13.004 MATH mem1 = .3 13.005 MEME 13.006 MEMC percent 5.00% 100H #! Test Tol 0.7, Sys Tol 0.00768, TUR 91.146 (>= 4.00). 14.001 DISP Disconnect the Wavetek FUNC OUT from the UUT and connect 14.001 DISP it to INPUT A on the 5335A. 14.002 DISP Adjust the Wavetek for a 3kHz sine wave output. 14.003 MESS Adjust the Stimulus output for a reading of 3003Hz 14.003 MESS on the frequency counter. 14.004 5700 2mV N 2W 14.005 MEME >1 14.006 MESS Adjust the Stimulus output for a reading of 2997Hz 14.006 MESS on the frequency counter. 14.007 5700 -2mV N 2W 14.008 MEM* -1 14.009 MEME >2 14.010 MATH mem = ((m[1] + m[2]) / 2.828) * 1e-3 14.011 MEME >3 14.012 MESS 14.013 5700 * S 14.014 DISP Disconnect the FUNC OUT from the 5335A INPUT A, and 14.014 DISP connect it to the UUT INPUT connectors. 14.015 5700 V 10H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 14.016 ACC 4mV 600P% 0.006U 14.017 MEMI Enter the UUT meter indication. 14.018 MATH mem1 = .1 14.019 MEME 14.020 MEMC percent 5.00% 10H #! Test Tol 0.2, Sys Tol 0.0084, TUR 23.810 (>= 4.00). 15.001 MEME <3 15.002 5700 V 100H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 15.003 ACC 4mV 120P% 0.006U 15.004 MEMI Enter the UUT meter indication. 15.005 MATH mem1 = .1 15.006 MEME 15.007 MEMC percent 5.00% 100H #! Test Tol 0.2, Sys Tol 0.00648, TUR 30.864 (>= 4.00). 16.001 HEAD {} 16.002 HEAD {ÍÍ .1% Range ÍÍ} 16.003 JMP 17.001 16.004 EVAL 17.001 DISP Set the UUT METER RANGE to .1%. 17.002 5700 V 10H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 17.003 ACC 4mV 600P% 0.006U 17.004 MEMI Enter the UUT meter indication. 17.005 MATH mem1 = .1 17.006 MEME 17.007 MEMC percent 5.00% 10H #! Test Tol 0.2, Sys Tol 0.0084, TUR 23.810 (>= 4.00). 18.001 5700 V 100H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 18.002 ACC 4mV 120P% 0.006U 18.003 MEMI Enter the UUT meter indication. 18.004 MATH mem1 = .1 18.005 MEME 18.006 MEMC percent 5.00% 100H #! Test Tol 0.2, Sys Tol 0.00648, TUR 30.864 (>= 4.00). 19.001 DISP Disconnect the Wavetek FUNC OUT from the UUT and connect 19.001 DISP it to INPUT A on the 5335A. 19.002 DISP Adjust the Wavetek for a 3kHz sine wave output. 19.003 MESS Adjust the Stimulus output for a reading of 3009Hz 19.003 MESS on the frequency counter. 19.004 5700 0.5mV N 2W 19.005 MEME >1 19.006 MESS Adjust the Stimulus output for a reading of 2991Hz 19.006 MESS on the frequency counter. 19.007 5700 -0.5mV N 2W 19.008 MEM* -1 19.009 MEME >2 19.010 MATH mem = ((m[1] + m[2]) / 2.828) * 1e-3 19.011 MEME >3 19.012 MESS 19.013 5700 * S 19.014 DISP Disconnect the FUNC OUT from the 5335A INPUT A, and 19.014 DISP connect it to the UUT INPUT connectors. 19.015 5700 V 10H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 19.016 ACC 1mV 600P% 0.005U 19.017 MEMI Enter the UUT meter indication. 19.018 MATH mem1 = .03 19.019 MEME 19.020 MEMC percent 5.00% 10H #! Test Tol 0.05, Sys Tol 0.0056, TUR 8.929 (>= 4.00). 20.001 MEME <3 20.002 5700 V 100H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 20.003 ACC 1mV 120P% 0.005U 20.004 MEMI Enter the UUT meter indication. 20.005 MATH mem1 = .03 20.006 MEME 20.007 MEMC percent 5.00% 100H #! Test Tol 0.05, Sys Tol 0.00512, TUR 9.766 (>= 4.00). 21.001 HEAD {} 21.002 HEAD {ÍÍ .03% Range ÍÍ} 21.003 JMP 21.001 21.004 EVAL 22.001 DISP Set the UUT METER RANGE to .03%. 22.002 5700 V 10H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 22.003 ACC 1mV 600P% 0.005U 22.004 MEMI Enter the UUT meter indication. 22.005 MATH mem1 = .03 22.006 MEME 22.007 MEMC percent 5.00% 10H #! Test Tol 0.05, Sys Tol 0.0056, TUR 8.929 (>= 4.00). 23.001 5700 V 100H O S 2W #! System Uncertainty not calculated because NOMINAL & RANGE values not spec. 23.002 ACC 1mV 120P% 0.005U 23.003 MEMI Enter the UUT meter indication. 23.004 MATH mem1 = .03 23.005 MEME 23.006 MEMC percent 5.00% 100H #! Test Tol 0.05, Sys Tol 0.00512, TUR 9.766 (>= 4.00). 24.001 DISP Disconnect all test equipment. 24.002 HEAD {} 24.003 HEAD {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»} 24.004 HEAD {º Frequency Meter Accuarcy º} 24.005 HEAD {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ} 24.006 HEAD ÍÍ Frequency Meter Accuarcy ÍÍ 24.007 JMP 24.008 EVAL 25.001 DISP Connect the 5700 V ê A OUTPUT to the UUT INPUT. 25.002 DISP Depress the UUT COUNT/W&F switch. 25.003 5700 100mV 10H S 2W 25.004 MEMI Enter the UUT FREQUENCY meter reading. 25.005 MATH mem1 = 10 25.006 MEME 25.007 MEMC H 1U #! Test Tol 0.001, Sys Tol 7.1e-005, TUR 14.085 (>= 4.00). 26.001 5700 100mV 100H S 2W 26.002 MEMI Enter the UUT FREQUENCY meter reading. 26.003 MATH mem1 = 100 26.004 MEME 26.005 MEMC H 1U #! Test Tol 0.001, Sys Tol 2e-005, TUR 50.000 (>= 4.00). 27.001 5700 100mV 1kH S 2W 27.002 MEMI Enter the UUT FREQUENCY meter reading. 27.003 MATH mem1 = 1000 27.004 MEME 27.005 MEMC H 1U #! Test Tol 0.001, Sys Tol 2e-005, TUR 50.000 (>= 4.00). 28.001 5700 100mV 5kH S 2W 28.002 MEMI Enter the UUT FREQUENCY meter reading. 28.003 MATH mem1 = 5000 28.004 MEME 28.005 MEMC H 1U #! Test Tol 0.001, Sys Tol 2e-005, TUR 50.000 (>= 4.00). 29.001 5700 100mV 9.99kH S 2W 29.002 MEMI Enter the UUT FREQUENCY meter reading. 29.003 MATH mem1 = 9990 29.004 MEME 29.005 MEMC H 1U #! Test Tol 0.001, Sys Tol 2e-005, TUR 50.000 (>= 4.00). 30.001 DISP Disconnect the 5700 from the UUT. 30.002 HEAD {} 30.003 HEAD {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»} 30.004 HEAD {º Oscillator Accuracy º} 30.005 HEAD {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ} 30.006 HEAD ÍÍ Oscillator Accuracy ÍÍ 30.007 JMP 31.001 30.008 EVAL 31.001 DISP On the rear of the UUT connect the OSC OUTPUT 31.001 DISP to INPUT A on the 5335A. 31.002 IEEE [@5335]RE; 31.003 IEEE [TERM LF] 31.004 IEEE [@5335][I] 31.005 MEM/ 1000 31.006 ACC 3.0000kH 1e-10P% 31.007 MEME 31.008 MEMC kH 0.200U #! T.U.R. not calculated because System Uncertainty too small. 32.001 HEAD {} 32.002 DISP {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»} 32.002 DISP {º THIS COMPLETES THE VERIFICATION º} 32.002 DISP {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ} 32.003 END #! T.U.R.s less than 4.00: 0 #! T.U.R.s estimated using RANGE value: 0 #! T.U.R.s not calculated (ASK- U): 0 #! T.U.R.s not computable at compile time: 1 #! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.